click for full size image WARNING - LARGE FILE!!! Copyright © 2006, yellowjeep.com

To connect to the mill, I drilled a 1.5" hole in the lowest part of the bottom. I cut the thread and flange from the 3-liter bottle that came with the mill and sanded it smooth, then screwed it into the mill body through the hole in the grain bin. It is difficult to see because it is clear.

File:	IMG_2211.JPG
Camera:	Canon EOS DIGITAL REBEL XT
Date/Time:	Wednesday, February 08, 2006, 10:51:27
Shutter speed:	1/60sec
Aperture:	f/4
Exposure mode:	Auto
Lens:	18 to 55mm @ 18mm
ISO:	400